What should be paid attention to when installing electronic truck scale?

Precautions for installation of electronic truck scale For truck scale without foundation pit support truck scale should be the basis of above the ground more than 50 mm, in order to prevent the groundwater and shifting sand into the truck, the basis of the base plates and corrosion, anchor bolt and the connection of the weighing sensor, which can lead to the service life of these steel components to reduce maintenance costs and increases the truck scale and frequency. The foundation surface of the foundation must have a level slope (high in the middle, low at both ends, slope 1%) so that rainwater can flow out of the foundation. For truck scale with foundation pit, reasonable waterproof, anti - dropping sand and drainage facilities should be designed to support the foundation of truck scale. Smart technology Digital electronic truck scale to solve the problem of biased load temperature and time effect creep -- intelligent technology; ① Through a simple circuit to change the size of the weighing signal to prevent cheating; ② Digital electronic truck scale can automatically compensate and adjust the influence of unbalanced load and temperature change. Consistency and good interchangeability. When multiple sensors are connected in parallel, linearity, calibration and performance compensation can be achieved through a software approach to reduce systematic errors and simplify field installation, commissioning, calibration and adjustment of scales. ③ Automatic fault diagnosis, error message code prompt function. ④ When the load is applied to the weighing sensor for a long time, its output often changes greatly. The digital weighing sensor automatically compensates for creep through software in the internal microprocessor.